{"id":636,"date":"2018-12-03T09:05:50","date_gmt":"2018-12-03T09:05:50","guid":{"rendered":"http:\/\/www.gyanvihar.org\/journals\/?p=636"},"modified":"2018-12-05T11:02:36","modified_gmt":"2018-12-05T11:02:36","slug":"tlbo-based-load-frequency-controller","status":"publish","type":"post","link":"https:\/\/www.gyanvihar.org\/journals\/tlbo-based-load-frequency-controller\/","title":{"rendered":"TLBO based Load Frequency Controller"},"content":{"rendered":"

pp 9-16 <\/strong><\/p>\n

Chirag Arora1<\/sup>, Dr. Nagendra Kumar Swarnkar2<\/sup>, Rahul Sharma3<\/sup><\/strong><\/p>\n

1<\/sup>M.Tech. Scholar, Department of Electrical Engineering, Suresh Gyan Vihar University, Jaipur, India chirag.arora@mygyanvihar.com<\/p>\n

2<\/sup>Professor, Department of Electrical Engineering, Suresh Gyan Vihar University, Jaipur, India<\/p>\n

nagendra.swarnkar@mygyanvihar.com<\/a><\/p>\n

3<\/sup>Assistant Professor, Department of Electrical Engineering, Suresh Gyan Vihar University, Jaipur, India<\/p>\n

rahul.sharma@mygyanvihar.com<\/a><\/p>\n

A<\/em><\/strong>bstract:<\/strong>\u00a0 <\/em>The goals of the LFC (Load Frequency Control) are to maintain zero steady state errors in a multi area interconnected power system with computer based control systems and multiple inputs, an automatic generation control system can take into account such matters as the most economical units to adjust, the coordination of thermal, hydroelectric, and other generation types, and even constraints related to the stability of the system and capacity of interconnections to other power grids. A proportional integral derivative controller (PID controller) is a generic loop feedback (controller) widely used in industrial control systems. A PID controller attempts to correct the error between a measured process variable and a desired set point by calculating and then instigating a corrective action that can adjust the process accordingly and rapidly, to keep the error minimal. The PID controller calculation involves three separate parameters; the proportional, the integral and the derivative values. The proportional value determines the reaction to the current error, the integral value determines the reaction based on the sum of recent errors, and the derivative value determines the reaction based on the rate at which the error has been changing. The weighted sum of these three actions is used to adjust the process via a control element such as the position of a control valve or the power supply of a heating elements.<\/p>\n

\u00a0\u00a0 Keywords-<\/em>–<\/em> Load Frequency Control, constant frequency, PID controller, Jaya technique.<\/p>\n

    \n
  1. I<\/strong>ntroduction<\/strong><\/li>\n<\/ol>\n

    Today in the large scale electric power systems with interconnected areas, LFC plays an important role. The objective of the LFC in an interconnected power system is to maintain the frequency of each area within limits and to keep tie-line power flows within some pre-specified tolerances by adjusting the MW outputs of the generators so as to accommodate fluctuating load demands. The load frequency control of an interconnected power system is being improved over the last few years.oday in electric power system Load\u2013frequency control (LFC) is important field for design and operation. In an interconnected power system, the generation of power within each area has to be controlled so as to maintain the scheduled power interchange. The modern power systems with industrial and commercial loads need to operate at constant frequency with reliable power. Owing to the continuous growth of electrical power system in size and complexity with increasing interconnections, the problem of power and frequency oscillations due to unpredictable load changes, has become increasingly serious.<\/p>\n

    This paper work uses a new Artificial Intelligence (AI) technique (ACO) for optimal tuning of PID controllers. The motivation behind this research is to prove and demonstrate the robustness of ACO based PID, and to improve the transient response of frequency deviation under various loading conditions in presence of system nonlinearities.<\/p>\n

      \n
    1. S<\/strong>YSTEM MODEL<\/strong><\/li>\n<\/ol>\n

      In an interconnected power system there are number of generators supplying the power system load, so there must be some methods, by which change in load could be allocated to each generator. This mechanism by which load is allocated to a generator can be controlled by system consisting of number of units which are being modelled here:<\/p>\n

        \n
      • Mathematical modelling of load<\/strong><\/li>\n<\/ul>\n

        The load on the power system consists of a variety of electrical drives. The equipment\u2019s used for lighting purposes are basically resistive in nature and the rotating devices are basically a composite of the resistive and inductive components. The speed-load characteristic of the composite load is given by:<\/p>\n

        \"\"<\/p>\n

        Where \u0394PL is the non-frequency- sensitive load change, D\u0394\u03c9 is the frequency sensitive load change. D is expressed as percent change in load by percent change in frequency.<\/p>\n

          \n
        • Mathematical Modelling of Generator<\/strong><\/li>\n<\/ul>\n

          A generator convert the mechanical energy into electrical energy. During steady state mechanical power input is such that it supplies the generator losses and electrical output power means mechanical torque is equal to electrical torque so the generator speed and fundamental output frequency remains constant. Let steady state operating generators parameters be:<\/p>\n

          \"\"<\/p>\n

          Under any mechanical or electrical perturbation will lead to deviation from steady state speed and frequency due to acceleration or retardation created due to imbalance in electrical and mechanical torque. Let \u03b1 be acceleration which results in \u00a0deviation in steady state speed and \u00a0deviation in steady state rotor angle.<\/p>\n

          Now, \u00a0will be related to \u00a0as:<\/p>\n

          \u00a0\u00a0\"\"<\/p>\n

          so, we can express the deviation in rated speed \u0394\u03c9 of generator as:<\/p>\n

          \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0\u00a0\"\"<\/p>\n

          Now the net accelerating torque can be expressed in terms of speed deviation and phase angle deviation, as<\/p>\n

          \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0\u00a0\"\"<\/p>\n

          Now, the difference of electrical output power and input mechanical power is related to net accelerating torque as<\/p>\n

          \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\"\"<\/p>\n

          Taking Laplace transform of the equation (5) we will have<\/p>\n

          \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0\u00a0\"\"<\/p>\n

          For the equation (6) obtained, the block diagram is shown if fig. 1.1<\/p>\n

          \"\"<\/p>\n

          Fig. 2.1 <\/strong>Relationship between mechanical and electrical power and speed change.<\/strong><\/p>\n

          The units for M <\/em>are watts per radian per second per second. We will always use per unit power over per unit speed per second where the per unit refers to the machine rating as the base. So, combined block diagram of generator and load as appeared at prime mover can be drawn as:<\/p>\n

          \"\"<\/p>\n

          Fig. 2.2 Combined block diagram of generator-load.<\/strong><\/p>\n

          \"\"<\/p>\n

            \n
          • Mathematical Modelling of Prime Mover<\/strong><\/li>\n<\/ul>\n

            According to availability of natural source of energy there are various types of prime movers to convert into mechanical power (\u0394Pm<\/sub>) also called turbine are used in power system which runs the generator. For example steam turbine of non-reheat, reheat type or hydro turbine etc.\u00a0 The main function of prime mover is to drive a generator unit and thus extract the mechanical power from source.\u00a0 For this dissertation work the simplest type of turbine that is no reheat turbine has been used. There is a time delay occur between the opening \/ closing of steam valve and production of torque to run prime mover. The transfer function for a non-reheat type is of first order shown below as by block diagram:<\/p>\n

            Fig. 2.3 Block diagram of non \u2013 reheat prime mover.<\/strong><\/p>\n

            \u00a0 \u00a0\u00a0 \u00a0\u00a0<\/sup>\"\"<\/p>\n

            The prime mover transfer function can be represented as:<\/p>\n

            Fig. 2.4 Combined turbine and generator model.<\/strong><\/p>\n

              \n
            • Mathematical Modelling of Governor<\/strong><\/li>\n<\/ul>\n

              We will illustrate such a speed-governing mechanism with the diagram shown in Fig. 2.5. The speed-measurement device\u2019s output, \u03c9, <\/em>is compared with a reference, \u03c9ref<\/sub> to, <\/strong>produce an error signal, \u0394\u03c9. <\/strong>The error, \u0394\u03c9, <\/strong>is negated and then amplified by a gain KG<\/sub>, <\/em><\/strong>and integrated to produce a control signal, \u0394Pv<\/sub>, <\/em><\/strong>which causes the main steam supply valve to open ( <\/strong>\u0394Pvalv<\/sub> position) when \u0394\u03c9 is negative. If, for example, the machine is running at reference speed and the electrical load increases, m <\/em>will fall below \u03c9ref<\/sub> and \u0394\u03c9 will be negative. The action of the gain and integrator will be to open the steam valve, causing the turbine to increase its mechanical output, thereby increasing the electrical output of the generator and increasing the speed.<\/em><\/p>\n

              Fig. 2.5 Governor with speed-droop feedback loop.<\/strong><\/p>\n

              \u00a0\"\"<\/strong><\/p>\n

              When \u03c9 exactly equals \u03c9ref<\/sub> the steam valve stays at the new position (further opened) to allow the turbine generator to meet the increased electrical load.<\/p>\n

              The result of adding the feedback loop with gain R <\/em>is a governor characteristic as shown in Fig. 2.6.<\/p>\n

              Fig. 2.6 Speed-droop characteristic<\/strong><\/p>\n

              \u00a0\"\"<\/strong><\/p>\n

              Fig. 2.7 Allocation of unit outputs with governor droop.<\/strong><\/p>\n

              \u00a0\"\"<\/strong><\/p>\n

              The value of R <\/em>determines the slope of the characteristic. That is, R <\/em>determines the change on the unit\u2019s output for a given change in frequency. Common practice is to set R <\/em>on each generating unit so that a change from 0 to 100% (i.e., rated) output will result in the same frequency change for each unit. As a result, a change in electrical load on a system will be compensated by generator unit output changes proportional to each unit\u2019s rated output\u00a0 \u00a0\u00a0\"\"<\/p>\n

              At this point, we can construct a block diagram of a governor-prime-mover, rotating mass \/ load model as shown in Figure 2.8.<\/p>\n

              \"\"<\/p>\n

              Fig. 2.8 Schematic diagram of a speed governing unit Redrawn and modified from<\/strong><\/p>\n

              Suppose that this generator experiences a step increase in load,<\/p>\n

              \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0\u00a0 \u00a0\u00a0\u00a0\"\"<\/p>\n

              The transfer function relating the load change , <\/em><\/strong>to the frequency change, \u00a0\u00a0<\/strong>is<\/p>\n

              \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0\u00a0\"\"<\/p>\n

              Applying the final value theorem to equation 3.11, the steady state value of generators angular velocity can be obtained as:<\/p>\n

              \"\"<\/p>\n

              AGC in a Single-Area System<\/p>\n

              In a single area system Fig.2.9, there is no tie-line schedule to be maintained. Thus the function of the AGC is only to bring the frequency to the nominal value, which will be achieved during the supplementary loop which uses the integral controller to change the reference power setting so as to change the speed set point. The integral controller gain Ki needs to be adjusted for satisfactory response (in terms of overshoot, settling time) of the system.<\/p>\n

              Fig. 2.9 The block diagram representation of single area power system<\/strong><\/p>\n

              \u00a0<\/strong><\/p>\n

              Although each generator will be having a separate speed governor, all the generators in the control area are replaced by a single equivalent generator, and the ALFC for the area corresponds to this equivalent generator. With the primary LFC loop, a change in the system load will result in a steady-state frequency deviation, depending on the governor speed regulation. In order to reduce the frequency deviation to zero, there should be a reset action. The reset action can be achieved by introducing an integral controller to act on the load reference setting to change the speed set point. The integral controller increases the system type by 1 which forces the final frequency deviation to zero. The integral controller gain K1<\/sub> must be adjusted for a satisfactory transient response. The close loop transfer function of the control system with only \u00a0as input becomes.<\/p>\n

              \u00a0\u00a0\u00a0 (14)<\/p>\n

              III. <\/strong>P<\/strong>ID-CONTROLLER & ITS TUNING TECHNIQUES<\/strong><\/p>\n

              Proportional Integral and Derivative (PID) Controller is a feedback based controller which gets the error output based on the characteristics of the error and gives good result. PID is used in a closed loop .it has three elements P, I, D. The PID controller is by far the most commonly used Controller Strategies in the process control industry.<\/p>\n

              PID controller is widely used in industrial control systems which are composed of proportional, integral and derivative control action. There are many forms of PID controller implementations such as a Distributed Control System (DCS) or stand-alone controller. It is widely used due to its simple structure and robust performance. PID controller is implemented as either stand-alone controller. Every parameter has gain by which we control the contribution, or control systems. PID controller is used as pneumatic, hydraulic or mechanical controller or had a simple interface for manual tuning of the controller. PID is simply an equation that the controller uses to evaluate the controlled variables. The controller then compares the feedback to the set point and generates to the controller. The value is examined with one or more of the three proportional, integral and derivative control mode. The controller issues the necessary commands or process inputs to correct the error.<\/p>\n

              PID controller can be used in closed loop with plant as given figure:<\/p>\n

              Fig. 3.1 PID control with plant in closed loop system.<\/strong><\/p>\n

                \n
              • Soft-computing techniques PID controller tuning<\/strong><\/li>\n<\/ul>\n

                For all these methods it is very urgent to know precise transfer function of the system than only soft computing methods can be applied for tuning the PID controller. But in practical applications, to a different extent, most of the industrial process exists to be nonlinear, the variability of parameters and there is high uncertainty in model of system, thus it is very typical and complex job to obtain precise control of the process using conventional tuning methods of PID controller. For tuning by common methods it is required that the process model should have system mathematical model of a certain type, as we have \u2018First order plus dead time\u2019 model as an example. This problem of precise tuning can be overcome by the applying soft-computing methods PID controller parameters tuning. Soft-computing methods are especially useful for solving problems which involve very large amount of complicated and lengthy calculation and also mathematically in traceable. This is due to the convenience of combining natural systems with intelligent machines effectively with the help of soft-computing methods. Among these entire soft-computing methods available neural network, fuzzy logic, genetic algorithm and Particle Swarm Optimization, Teacher learning based optimization techniques & Jaya optimization techniques are the most important.<\/p>\n

                  \n
                1. S<\/strong>YSTEM SIMULATION & RESULT ANALYSIS<\/strong><\/li>\n<\/ol>\n

                  In this dissertation work I have examined the effectiveness of Jaya optimization technique by applying the same in load frequency control problem in power system. For this the proposed method have been applied to determine the controller parameters for load frequency control of single area system.<\/p>\n

                  \u00a0\"\"<\/strong><\/p>\n

                  Table: 4.1<\/strong><\/p>\n

                  Power System Parameters<\/strong><\/p>\n\n\n\n\n\n\n\n\n
                  S. No.<\/strong><\/td>\nDescription<\/strong><\/td>\nSymbol<\/strong><\/td>\nValue<\/strong><\/td>\n<\/tr>\n
                  1<\/td>\nInertia constant<\/td>\nH<\/td>\n10<\/td>\n<\/tr>\n
                  2<\/td>\nLoad constant<\/td>\nD<\/td>\n0.8<\/td>\n<\/tr>\n
                  3<\/td>\nGovernor time constant<\/td>\n\u03c4g<\/sub><\/td>\n0.2<\/td>\n<\/tr>\n
                  4<\/td>\nTurbine time constant<\/td>\n\u03c4t<\/sub><\/td>\n0.5<\/td>\n<\/tr>\n
                  5<\/td>\nDroop coefficient<\/td>\nR<\/td>\n0.01<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

                  Response of Isolated power system without controller.<\/p>\n

                  With Matlab Simulink software model of isolated load frequency control has been developed which is shown below in Fig. 4.1.<\/p>\n

                  \"\"<\/strong><\/p>\n

                  Fig. 4.1 Simulink Model of Isolated Non-reheat Type Power System.<\/strong><\/p>\n

                  \u00a0\"\"<\/strong><\/p>\n

                  Fig. 4.2 (a) Step response of Governor output deviation without secondary control loop.<\/strong><\/p>\n

                  \"\"<\/p>\n

                  For a large variation in system load steady state error is also large and does not depends on turbine or governor action. Their faster and improved performance can only reduce the deviation of system frequency during transient at the beginning of the perturbation.<\/p>\n

                  Fig. 4.2 (b) Step response of turbine output deviation without secondary control loop.<\/strong><\/p>\n

                  \"\"<\/p>\n

                  Fig. 4.2 (c) Step response of Generator-load frequency without secondary control loop.<\/strong><\/p>\n

                  \"\"<\/p>\n

                  From the above step response graphical representation of the system frequency and governor and turbine power it is clear that there is inherent steady state error in load frequency response of system for a step input. So there is urgent need of stable feedback control which could reduce the frequency error to zero after a load change. During transient time which should be tried to keep as small as possible, and control loop should be designed such way the deviation of system frequency could be minimized further integral frequency is to be kept within certain limit.<\/p>\n

                    \n
                  • Response of Isolated power system with Jaya Optimization Based PI Controller.<\/strong><\/li>\n<\/ul>\n

                    As the load on system changes depending on governor dynamics there occur a deviation in system frequency from its steady state value. So there is a further requirement of system frequency regulation by some reset action which can be obtained by introducing a integral control term. The integral control term will act to change the speed set point by acting on load reference point. By introduction of integral term system type increases by 1 which results in opposition to frequency deviation to zero. Fig. 4.3 shows the load frequency control block diagram with additional integral control term. Now, value of gain of integral control term should be such that system dynamics get improved. In fig. 4.4 both the parallel controller terms have been combined in one.<\/p>\n

                    Fig. 4.3 Experimental System Block Diagram with secondary loop.<\/strong><\/p>\n

                    \"\"<\/p>\n

                    Using the block diagram shown in Fig. 4.4 the system transfer function can be expressed as\u00a0\"\"<\/p>\n

                    Fig. 4.4 Reduced Experimental System Block Diagram without secondary loop.<\/strong><\/p>\n

                    \"\"<\/p>\n

                    Applying Jaya optimization technique the value of Ki<\/sub> = 278 and Kp <\/sub>= 130 and Kd <\/sub>= 381 are obtained so overall transfer is:<\/p>\n

                    Above shown single area system has been provided with a PID controller for purpose of controlling the deviation of system frequency. The frequency, turbine and governor deviation response of system for a 20% load change controlled with Teaching learner based optimization technique based PID controller has been shown in fig. 4.6 (a) \u2013 (d).<\/p>\n

                    Fig. 4.5 Simulink Model of Isolated Non-reheat Type Power System with secondary PID controller.<\/strong><\/p>\n

                    \"\"<\/p>\n

                    Fig. 4.6 (a) Step response of Governor output deviation with Jaya based PID secondary control loop.<\/strong><\/p>\n

                    \"\"<\/p>\n

                    Fig. 4.6 (b) Step response of turbine with Jaya based PID secondary control loop.<\/strong><\/p>\n

                    \u00a0\"\"<\/strong><\/p>\n

                    Fig. 4.6 (c) Step response of Generator-load frequency deviation with TLBO based PID secondary control loop. <\/strong><\/p>\n

                    Fig. 4.6 (d) Zoom View of Step response of Generator-load frequency deviation with TLBO based PID secondary control loop.<\/strong><\/p>\n

                    \"\"<\/p>\n

                    Table: 4.2<\/strong><\/p>\n

                    Comparison of Dynamic Response of Single Area Power System.<\/strong><\/p>\n\n\n\n\n\n\n\n\n\n
                    <\/td>\nPower System Without Controller <\/strong><\/td>\nPower System<\/strong><\/p>\n

                    With PID Controller <\/strong><\/td>\n<\/tr>\n

                    Steady state error<\/td>\n0.012pu<\/td>\n0<\/td>\n<\/tr>\n
                    % reduction in Steady state error<\/td>\n<\/td>\n\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 100 %<\/td>\n<\/tr>\n
                    Peak overshoot<\/td>\n-0.0048<\/td>\n-0.0009<\/td>\n<\/tr>\n
                    % reduction in peak overshoot<\/td>\n<\/td>\n81.25 %<\/td>\n<\/tr>\n
                    Settling time<\/td>\n6<\/td>\n3<\/td>\n<\/tr>\n
                    % reduction in settling time<\/td>\n<\/td>\n50 %<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n


                    \n<\/strong>
                    \n<\/strong><\/p>\n

                      \n
                    1. C<\/strong>ONCLUSIONS<\/strong><\/li>\n<\/ol>\n

                      The graphical representation of step response for system controlled with TLBO based PID controller, the steady state frequency returns to its rated value and deviation reduces to zero about in 3 seconds. The value of peak deviation in system frequency also has reduced to very low value, resulted in 82% low overshoot. Maximum value of magnitude of transient oscillation has also reduced many folds so the system has become more stable. Thus proposed TLBO based PID controller has results in true optimal gains, reduced oscillation leading to quicker stability and peak overshoot also minimum settling time during transient period shown in Fig. 5.8 (a) \u2013 (d).<\/p>\n

                      The frequency response for the PID controller is better than compared to the response of I & PI controllers. It is seen that the settling and rise time in case of PID controller has been smaller as compared to the others and also the oscillations are relatively less for the system than that for the I & PI controllers. It is also seen at higher step load change (i.e. \u02c30.01), the responses become more oscillated with higher settling time. By comparison of deviation response with and without controller it is clear that Jaya technique based PID load frequency controller can regulate the deviation of frequency, turbine and governor response to converge to the required acceptable value in acceptable time, even when system parameters are not at their nominal value. This shown the robustness of Jaya technique based PID load frequency controller of the system.<\/p>\n

                      r<\/strong>eferences <\/strong><\/p>\n

                        \n
                      • Arthur W. Berger and Fred C. Schweppe, \u201cReal Time Pricing To Assist In Load Frequency Control\u201d, IEEE Transactions on Power Systems<\/em>, pp. 920 \u2013 926, Vol. 4, No. 3, August 1989.<\/li>\n
                      • Soundarrajan, Dr.S.Sumathi and C.Sundar, \u201cParticle Swarm Optimization Based LFC and AVR of Autonomous Power Generating System\u201d, IAENG International Journal of Computer Science, pp. 37 \u2013 44, Vol. 1, February 2010.<\/li>\n
                      • Armin Ebrahimi Milani and Babak Mozafari, \u201cGenetic Algorithm Based Optimal Load Frequency Control In Two-Area Interconected Power Systems\u201d, Global Journal of <\/em>Technology and Optimization, <\/em> 6 \u2013 10, Vol. 2, January 2010.<\/li>\n
                      • Babak Keyvani Boroujeni, \u201cTwo-Area Load Frequency Control Using IP Controller Tuned Based on Tabu Search\u201d, Journal of Basic and Applied Scientific Research<\/em>, 1(12)2817-2822, 2011.<\/li>\n
                      • Ndubisi Samuel .N., \u201cA single area load frequency control: a comparative study based on pi, optimal and fuzzy logic controllers\u201d, American Journal Of Scientific And Industrial Research<\/em>, 748-754, Vol. – 2(5), 2011.<\/li>\n
                      • Surya Prakash and S.K. Sinha, \u201cLoad frequency control of three area interconnected hydro-thermal reheat power system using artificial intelligence and PI controllers\u201d, International Journal of Engineering, Science and Technology<\/em>, pp. 23-37, Vol. 4, No. 1, 2011.<\/li>\n
                      • M .Ismail and M. A. Mustafa Hassan, \u201cLoad Frequency Control Adaptation Using Artificial Intelligent Techniques for One and Two Different Areas Power System\u201d, International Journal of Control, Automation And Systems<\/em>, pp. 12 \u2013 23, Vol. 1, No. 1, January 2012.<\/li>\n
                      • Karthikeyan, S.Ramya And Dr. S.Chandrasekar, \u201cLoad Frequency Control For Three Area System With Time Delays Using Fuzzy Logic Controller\u201d, International Journal Of Engineering Science & Advanced Technology<\/em>, Pp. 612 \u2013 618, Volume-2, Issue-3, May-Jun 2012.<\/li>\n
                      • Isha Garg and Mohd. Ilyas, \u201cStudy of Two Area Load Frequency Control in Deregulated Power System\u201d, International Journal of Innovative Technology and Exploring Engineering (IJITEE) pp. 42 \u2013 45, ISSN: 2278-3075, Volume-1, Issue-2, July 2012.<\/li>\n
                      • Ganesh, K.Vasu and P.Bhavana, \u201cLQR Based Load Frequency Controller for Two Area Power System\u201d, International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, <\/em>Vol. 1, Issue 4, October 2012.<\/em><\/li>\n
                      • Sachin Khajuria and Jaspreet Kaur, \u201cLoad Frequency Control of Interconnected Hydro-Thermal Power System Using Fuzzy and Conventional PI Controller\u201d, International Journal of Advanced Research in Computer Engineering & Technology (IJARCET<\/em>), pp. 65 \u2013 72, Volume 1, Issue 8, October 2012.<\/li>\n
                      • Ashok Mohan Jadhav, K. Vadirajacharya and Elijah Tintius Toppo, \u201cApplication Of Particle Swarm Optimisation In Load Frequency Control Of Interconnected Thermal-Hydro Power Systems\u201d, J. Swarm Intelligence<\/em>, pp. 91 \u2013 113, Vol. 1, No. 1, 2013.<\/li>\n
                      • Atul Ikhe and Anant Kulkarni, \u201cLoad frequency control for interconnected power system using different controllers\u201d, Automation, Control and Intelligent Systems, Science Publishing Group, pp. 85-89, Vol. 1, No. 4, 2013.<\/li>\n
                      • Prathibha M and Bhavani M, \u201cAutomatic Generation Control in Restructured Power System with Wind Integrated System\u201d, International Journal of Innovative Research in Science, Engineering and Technology, pp. 461 \u2013 467, Volume 3, Special Issue 3, March 2014.<\/li>\n
                      • V. Rao, V.J. Savsani, D.P. Vakharia, \u201cTeaching-learning-based optimization: a novel optimization method for continuous non-linear large scale problems\u201d, Inform. Sci. 183 (2012)1\u201315<\/li>\n
                      • Venkata Rao, \u201cJaya: A simple and new optimization algorithm for solving constrained and unconstrained optimization problems\u201d, International Journal of Industrial Engineering Computations<\/em>, pp. 19 \u2013 34, Vol.- 7, 2016.<\/li>\n
                      • O. I., \u201cEnergy Systems Theory: an introduction\u201d, New York: McGraw-Hill, Electric, 1982.<\/li>\n
                      • Allen J.Wood, Bruce F.Wollenberg, \u201cPower Generation operation and control\u201d John Wiley & sons, 1996.<\/li>\n<\/ul>\n

                        Saadat H., \u201cPower System Analysis\u201d,<\/p>\n

                        \n","protected":false},"excerpt":{"rendered":"

                        pp 9-16 Chirag Arora1, Dr. Nagendra Kumar Swarnkar2, Rahul Sharma3 1M.Tech. Scholar, Department of Electrical Engineering, Suresh Gyan Vihar University, Jaipur, India chirag.arora@mygyanvihar.com 2Professor, Department of Electrical Engineering, Suresh Gyan Vihar University, Jaipur, India nagendra.swarnkar@mygyanvihar.com 3Assistant Professor, Department of Electrical Engineering, Suresh Gyan Vihar University, Jaipur, India rahul.sharma@mygyanvihar.com Abstract:\u00a0 The goals of the LFC (Load […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[17],"tags":[],"class_list":["post-636","post","type-post","status-publish","format-standard","hentry","category-vol-4-issue-2"],"yoast_head":"\nresearch journal - Research Journal<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.gyanvihar.org\/journals\/tlbo-based-load-frequency-controller\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"TLBO based Load Frequency Controller - research journal\" \/>\n<meta property=\"og:description\" content=\"pp 9-16 Chirag Arora1, Dr. Nagendra Kumar Swarnkar2, Rahul Sharma3 1M.Tech. Scholar, Department of Electrical Engineering, Suresh Gyan Vihar University, Jaipur, India chirag.arora@mygyanvihar.com 2Professor, Department of Electrical Engineering, Suresh Gyan Vihar University, Jaipur, India nagendra.swarnkar@mygyanvihar.com 3Assistant Professor, Department of Electrical Engineering, Suresh Gyan Vihar University, Jaipur, India rahul.sharma@mygyanvihar.com Abstract:\u00a0 The goals of the LFC (Load […]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.gyanvihar.org\/journals\/tlbo-based-load-frequency-controller\/\" \/>\n<meta property=\"og:site_name\" content=\"research journal\" \/>\n<meta property=\"article:published_time\" content=\"2018-12-03T09:05:50+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2018-12-05T11:02:36+00:00\" \/>\n<meta property=\"og:image\" content=\"http:\/\/www.gyanvihar.org\/journals\/wp-content\/uploads\/2018\/12\/aa-25.jpg\" \/>\n<meta name=\"author\" content=\"gyanvihar\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"gyanvihar\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"17 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.gyanvihar.org\/journals\/tlbo-based-load-frequency-controller\/\",\"url\":\"https:\/\/www.gyanvihar.org\/journals\/tlbo-based-load-frequency-controller\/\",\"name\":\"TLBO based Load Frequency Controller - research journal\",\"isPartOf\":{\"@id\":\"https:\/\/www.gyanvihar.org\/journals\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.gyanvihar.org\/journals\/tlbo-based-load-frequency-controller\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/www.gyanvihar.org\/journals\/tlbo-based-load-frequency-controller\/#primaryimage\"},\"thumbnailUrl\":\"http:\/\/www.gyanvihar.org\/journals\/wp-content\/uploads\/2018\/12\/aa-25.jpg\",\"datePublished\":\"2018-12-03T09:05:50+00:00\",\"dateModified\":\"2018-12-05T11:02:36+00:00\",\"author\":{\"@id\":\"https:\/\/www.gyanvihar.org\/journals\/#\/schema\/person\/8eddba30598505d042b861de57a1c98f\"},\"breadcrumb\":{\"@id\":\"https:\/\/www.gyanvihar.org\/journals\/tlbo-based-load-frequency-controller\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.gyanvihar.org\/journals\/tlbo-based-load-frequency-controller\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.gyanvihar.org\/journals\/tlbo-based-load-frequency-controller\/#primaryimage\",\"url\":\"https:\/\/www.gyanvihar.org\/journals\/uploads\/2018\/12\/aa-25.jpg\",\"contentUrl\":\"https:\/\/www.gyanvihar.org\/journals\/uploads\/2018\/12\/aa-25.jpg\",\"width\":279,\"height\":29},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.gyanvihar.org\/journals\/tlbo-based-load-frequency-controller\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.gyanvihar.org\/journals\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"TLBO based Load Frequency Controller\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.gyanvihar.org\/journals\/#website\",\"url\":\"https:\/\/www.gyanvihar.org\/journals\/\",\"name\":\"research journal\",\"description\":\"Research Journal\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.gyanvihar.org\/journals\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.gyanvihar.org\/journals\/#\/schema\/person\/8eddba30598505d042b861de57a1c98f\",\"name\":\"gyanvihar\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.gyanvihar.org\/journals\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/da4adb9a3aecf9b52039c367720edd29?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/da4adb9a3aecf9b52039c367720edd29?s=96&d=mm&r=g\",\"caption\":\"gyanvihar\"},\"url\":\"https:\/\/www.gyanvihar.org\/journals\/author\/gyanvihar\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"research journal - Research Journal","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.gyanvihar.org\/journals\/tlbo-based-load-frequency-controller\/","og_locale":"en_US","og_type":"article","og_title":"TLBO based Load Frequency Controller - research journal","og_description":"pp 9-16 Chirag Arora1, Dr. Nagendra Kumar Swarnkar2, Rahul Sharma3 1M.Tech. Scholar, Department of Electrical Engineering, Suresh Gyan Vihar University, Jaipur, India chirag.arora@mygyanvihar.com 2Professor, Department of Electrical Engineering, Suresh Gyan Vihar University, Jaipur, India nagendra.swarnkar@mygyanvihar.com 3Assistant Professor, Department of Electrical Engineering, Suresh Gyan Vihar University, Jaipur, India rahul.sharma@mygyanvihar.com Abstract:\u00a0 The goals of the LFC (Load […]","og_url":"https:\/\/www.gyanvihar.org\/journals\/tlbo-based-load-frequency-controller\/","og_site_name":"research journal","article_published_time":"2018-12-03T09:05:50+00:00","article_modified_time":"2018-12-05T11:02:36+00:00","og_image":[{"url":"http:\/\/www.gyanvihar.org\/journals\/wp-content\/uploads\/2018\/12\/aa-25.jpg","type":"","width":"","height":""}],"author":"gyanvihar","twitter_card":"summary_large_image","twitter_misc":{"Written by":"gyanvihar","Est. reading time":"17 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.gyanvihar.org\/journals\/tlbo-based-load-frequency-controller\/","url":"https:\/\/www.gyanvihar.org\/journals\/tlbo-based-load-frequency-controller\/","name":"TLBO based Load Frequency Controller - research journal","isPartOf":{"@id":"https:\/\/www.gyanvihar.org\/journals\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.gyanvihar.org\/journals\/tlbo-based-load-frequency-controller\/#primaryimage"},"image":{"@id":"https:\/\/www.gyanvihar.org\/journals\/tlbo-based-load-frequency-controller\/#primaryimage"},"thumbnailUrl":"http:\/\/www.gyanvihar.org\/journals\/wp-content\/uploads\/2018\/12\/aa-25.jpg","datePublished":"2018-12-03T09:05:50+00:00","dateModified":"2018-12-05T11:02:36+00:00","author":{"@id":"https:\/\/www.gyanvihar.org\/journals\/#\/schema\/person\/8eddba30598505d042b861de57a1c98f"},"breadcrumb":{"@id":"https:\/\/www.gyanvihar.org\/journals\/tlbo-based-load-frequency-controller\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.gyanvihar.org\/journals\/tlbo-based-load-frequency-controller\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.gyanvihar.org\/journals\/tlbo-based-load-frequency-controller\/#primaryimage","url":"https:\/\/www.gyanvihar.org\/journals\/uploads\/2018\/12\/aa-25.jpg","contentUrl":"https:\/\/www.gyanvihar.org\/journals\/uploads\/2018\/12\/aa-25.jpg","width":279,"height":29},{"@type":"BreadcrumbList","@id":"https:\/\/www.gyanvihar.org\/journals\/tlbo-based-load-frequency-controller\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.gyanvihar.org\/journals\/"},{"@type":"ListItem","position":2,"name":"TLBO based Load Frequency Controller"}]},{"@type":"WebSite","@id":"https:\/\/www.gyanvihar.org\/journals\/#website","url":"https:\/\/www.gyanvihar.org\/journals\/","name":"research journal","description":"Research Journal","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.gyanvihar.org\/journals\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Person","@id":"https:\/\/www.gyanvihar.org\/journals\/#\/schema\/person\/8eddba30598505d042b861de57a1c98f","name":"gyanvihar","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.gyanvihar.org\/journals\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/da4adb9a3aecf9b52039c367720edd29?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/da4adb9a3aecf9b52039c367720edd29?s=96&d=mm&r=g","caption":"gyanvihar"},"url":"https:\/\/www.gyanvihar.org\/journals\/author\/gyanvihar\/"}]}},"_links":{"self":[{"href":"https:\/\/www.gyanvihar.org\/journals\/wp-json\/wp\/v2\/posts\/636","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.gyanvihar.org\/journals\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.gyanvihar.org\/journals\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.gyanvihar.org\/journals\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.gyanvihar.org\/journals\/wp-json\/wp\/v2\/comments?post=636"}],"version-history":[{"count":3,"href":"https:\/\/www.gyanvihar.org\/journals\/wp-json\/wp\/v2\/posts\/636\/revisions"}],"predecessor-version":[{"id":1915,"href":"https:\/\/www.gyanvihar.org\/journals\/wp-json\/wp\/v2\/posts\/636\/revisions\/1915"}],"wp:attachment":[{"href":"https:\/\/www.gyanvihar.org\/journals\/wp-json\/wp\/v2\/media?parent=636"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.gyanvihar.org\/journals\/wp-json\/wp\/v2\/categories?post=636"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.gyanvihar.org\/journals\/wp-json\/wp\/v2\/tags?post=636"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}